|Terms of Trade:||FOB,CFR|
|Min. Order:||1 Set/Sets|
|Delivery Time:||75 Days|
|Place of Origin:||China|
|Supply Ability:||50 per month|
|Certificate:||IS0:9001:2008 SGS CE|
Model No.: LN-PIM-0.8
LINA 0.8 Liters Zirconia Powder Dispersion Kneader
LINA 0.8 Liters Zirconia Powder Dispersion Mixer is suitable for a large range of ceramic and mental powder materials. On the purpose of easy cleaning and avoid material formula lost, this type of Dispersion Kneader's mixing rotors can be disassemble and detached from the mixing room completely. LINA Open-Close Dispersion Mixing Machine for Mental Injection Molding can clean up even sticky materials without dead corners; The mixing chamber and rotors can be separated completely. For high hardness materials, tungsten carbide can be casted on the surface of rotors and mixing chamber. In addition, surface that directly contact with the materials is mirror polished which ensures all the materials easy to be cleaned without stickiness and avoid formula lost and pollution. This type of Small Size Banbury Kneader for Zirconia Powder is able to meet the large demand in today's CIM and PIM industry. PIM Dispersion Kneader, PIM Dispersion Kneader, Zirconia Powder Kneader, Ceramic Powder Dispersion Mixer, Titanium Alloy Powder Mixer
Characteristics of LINA 0.8 L Mental Powders Dispersion Mixer
1. Higher cleanness: Clean up the material without dead corners; The mixing chamber and rotors can be separated completely; All surface that directly contact with the material is mirror polished, which ensure all the materials easy to clean without stickiness.
2. Wearable inner cavity: Imported special new alloy steel and vacuum heat treatment are adopted. Strong wear resistance, resistance to horizontal erosion, corrosion resistance and high glossy finish effects are achieved.
3. Adjustable rotor speed ratio: The speed ratio of rotors is adjustable, which target at some special material function requirements and achieve best dispersion effect and efficiency.
4. Temperature control system: A lot of trials report that stage temperature control has the essential effect of ceramics' color difference.
5. PLC intelligent control system: 1. Real-time data record and export of kneading time, temperature (mixing chamber and front/rear rotors), ram pressure, current, torque and recipe code. 2. The control system can be set up to 20 mixing steps, save 20 recipe spaces. 3. The control system is capable of remote importing of the process recipe and data monitoring, and communicating with MES via Ethernet communication interface. 4. An Ethernet communication interface and 20% of the control points are reserved. Touch screen is provided.
Specifications of LINA 0.8 Liters Ceramics Dispersion Kneader
| Item ||Specification|| |
| Mixing Capacity || 0.8 liters || |
| Production Yield || 0.8-1.0 KG per time || Subject to the proportion of material and dispersion requirements. |
| Main Motor Power ||2.2 KW|| |
|Maximum Separation||200 mm|| |
| Temperature Control || Heating or/and cooling || Electric/oil/steam heating and circulating water cooling. |
| Weight || About 1000 KG || |
| Standard Dimensions || |
Eco Type Dimensions
Details of LINA 0.8 Liters Lab Mixer for MIM
LINA After-Sales Services
1. On-site installation assistance is available. (There are no charges on installation and trial running, but VISA fees, accommodation fees and transportation fees etc, of the supplier's side are charged by the buyer.)
2. Training of customer's operators and maintenance personnel and long-term technical consultation is provided.
3. One year's non-charge warranty period is provided for units in normal operation and long-term spare parts/components are available. During the warranty period, the supplier, within three hours since receipt of purchaser's notice of any equipment fault, shall provide express solution, and, if necessary, assign service engineer(s) to site across China within 72 hours or site in Pearl River Delta within 5 hours (excluding travel time). Response time for customers overseas shall be agreed upon otherwise based on application for visa and accessibility to the customer's location.
Are you factory or trading company?
LINA Machinery has been engaged in Rubber & Plastic mixing machine for many years. We have workshop and R&D department.
What about the operational guideline?
Training of customer's operator and maintenance personnel and long-term technical consultation is provided.
How about the warranty time?
One year's non-charge warranty period is provided for units in normal operation and long-term spare parts/component are available.
Do you offer the customization of the machine?
Certainly, LINA will give you the most proper recommendation and setting according to your materials and demand.
Guangdong LINA Industrial Co., Ltd. has more than 10 years of experience in R&D of rubber and plastic industry chain, and we are leading the industry in terms of technology, quality and service.For instant,Toyota, Nike and Bridgestone are our customers and cooperative partners.
We are good at designing "turkey projects", including intellectualized system,energy-saving automation environmental protection and security, such as new production line of silicone rubber mixing and forming, high-low temperature/O2 isolation, vacuum, granulation or molding production line for new special materials, multi-functional kneader like auto-weighting,shifting and green powder injection, granulation,forming etc, with dust collection. we focuses on R&D, manufacturing, selling and maintenance,moreover we have our own professional designers to meet your requirements.